d&b audiotechnik Z5024, Инструкция по монтажу

Страница: 4 / 6

Z5024 Mounting instructions (5.0E) Page 4 of 6
Part list Z5024 Loudspeaker stand adapter
[2]
[1] [3]
[4]
[5]
−
1 x Z5024 Adapter für Boxenstativ [1]
−
3 x Fixing bolt M8x30 [2]
−
2 x Hex head screw DIN 933-M8x18-8.8 [3]
−
2 x Spring washer 8.2 [4]
−
2 x Plain washer 8.4 [5]
Weight Z5024 Loudspeaker stand adapter
0.6 kg/1.3 lb
Assembly
Fitting the adapter using the hex head
screw [3] spring [4] and plain [5]
washers
Fitting the adapter using the
fixing bolt [2]
Each adapter is supplied with two M8x18mm hex head screws [3] ,
spring [4] and plain [5] washers. The adapter is either fitted to the
accessories described above or directly fitted to E1 or E3
loudspeakers.
Fixing screws longer than those supplied must not be used. Longer
screws can punch in the E1 or E3 threaded inserts and breach the
cabinet’s air-tight seal. The adapter may also be fitted using two M8
Safety eyebolts (Q9031).
Alternatively the adapter can be fittet using the two fixing bolts [2] .
In this case the spring [4] and plain [5] washers are not used.
Operation
[2]
The horizontal angle can be set by slakening the fixing bolt [2] .
After horizontal alignment retighten the fixing screw [2] .
Rigging examples