d&b audiotechnik T10, Руководство пользователя

Страница: 5 / 12

2.1. Product description
The T10 is a very compact loudspeaker system which can be used
both, as a line array and as a high directivity point source speaker.
For these applications, the T10 cabinet provides two different
dispersion characteristics which can be swapped over without any
tools.
The core of the design is a unique combination of a rotatable
waveguide with horn and an acoustic lens. The horn natively
provides a vertical line source with 90° horizontal dispersion. The
lens is part of the front grill and widens the HF dispersion in line
array mode to 105°.
When used upright as a point source, the lens curves the wavefront
of the line source providing a 90° x 35° dispersion pattern.
The T10 is a two way design, employing dual 6.5” drivers, a 1.4”
exit compression driver and a passive crossover network. The low
drivers are positioned in a dipolar arrangement providing an
exceptional dispersion control towards low frequencies.
Its frequency response extends from 68 Hz to above 18 kHz.
The cabinet is constructed from polyurethane integral hard foam
with an impact and weather resistant black paint finish. The cabinet
shape allows the system to be set up as a single unit in upright
orientation or as a line array in user defined vertical configurations.
The front of the loudspeaker cabinet is protected by a rigid metal
grill in front of an acoustically transparent foam.
T-Series rigging components and arrays
For point source applications the T10 is fitted with six threaded
inserts to connect to different rigging accessories such as
Z5371 T Flying bracket, Z5372 T Horizontal bracket,
Z5354 E8/E12 Flying adapter or the
Z5020/25 Flying adapter 02/03.
When applied as a line array, cabinets are mechanically
connected using the rigging strands on both sides of the cabinet
front and a central strand at the rear of the cabinet. All necessary
rigging components are mounted to the cabinet and are folded or
slide out when needed. Splay angles between adjacent cabinets
can be set in the range from 0° to 15°.
A detailed description of the T-Series rigging components is given
in the T-Series Rigging manual which is provided with the
Z5370 T Flying frame.
T10 line arrays of up to 3 cabinets can be supported with the
Z5373 T Cluster bracket which allows an easy aiming of the array
either flown or mounted on a high-stand.
A detailed description of planning and designing T arrays is given
in the technical information "TI 385 d&b Line array design,
d&b ArrayCalc" which is also provided with the T Flying frame.
The d&b ArrayCalc simulation software can be downloaded from
the d&b website at www.dbaudio.com .
T10 Loudspeaker
1: Horn and lens in line source setup
2: Horn and lens in point source setup
2. T10 loudspeaker
d&b T10 Manual 1.1 en 5