XSL Rigging components
Load beam instruction label
Two instruction labels are located at the bottom strand of the load
beams, indicating the hole positions for:
Pos.
Description
[3a/b] Hole positions for the two rigging modes:
▪ Hole pair
[3a] for STANDARD MODE.
▪ Hole pair
[3b] for FRONT EXTENSION.
[4]
Hole position for the cable pick providing a 22 mm
(0.85") hole for the attachment of a standard 3.25 t
shackle.
[5]
Hole position for the attachment of the Z5776 XSL
Compression chain.
[6]
Hole position for the additional Rear link adapter for
the deployment of XSL-GSUB cabinets.
Dimensional drawing
Z5772 XSL Load beam dimensions in mm [inch]
3.2.1 Z5713 SL Cable pick
The Z5713 SL Cable pick consists of coupling shackle
[1] with a
corresponding Locking pin (Type A: 16 x 55 mm) and a hook with
safety latch
[2].
It is intended to be attached to the load beam. For this purpose, the
load beam provides a dedicated 21 mm hole.
Alternatively, a standard 3.25 t shackle can be used for this
purpose.
d&b XSL Rigging manual 1.1 en
- preliminary -
12
