d&b audiotechnik M6, Руководство пользователя

Страница: 6 / 12

2.3. Operation
NOTICE!
Only operate d&b loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Applicable d&b amplifiers:
D80/D20/D12/D6/10D/30D.
Application Setup Cabinets per
channel
M6 passive M6
(Dual Channel or
Mix TOP/SUB
mode)
2
Application Setup Cabinets per
pair of amplifier
channels
M6 active M6
(2-Way Active
mode)
2
Passive operation ("Dual channel" mode)
Selecting "Dual channel" mode with the M6 setup enables up to
two M6 cabinets to be driven by the respective channel.
In "Dual channel" mode each amplifier channel drives all output
pins of its respective output connector thus driving the cabinet's HF
and LF sections via their passive crossover networks. Pins 1+/2+ of
the NL4 output connector (EP5: 1/3) carry the positive and pins
1–/2– (EP5: 2/4 ) carry the negative components of the signal.
Passive operation ("Mix TOP/SUB" mode)
With its standard connector wiring the M6 requires 4 wires to be
driven and therefore cannot be used in "Mix TOP/SUB" mode.
However, for permanent passive use with dedicated 2-wire cabling
the M6 setup is also available in "Mix TOP/SUB" mode.
Input/Output routing "Dual channel"*
* Schematic diagram
Input/Output routing "Mix TOP/SUB"*
* Schematic diagram
d&b M6 Manual 1.1 en 6