d&b audiotechnik DS100, Руководство пользователя

Страница: 14 / 20

5.1. Web Remote interface
A Web Remote interface is integrated which provides direct access
to the DS100 using a standard web browser.
Note: The DS100 can only be accessed after connecting the
device to a computer via Ethernet. However, this requires to
manually set a static IP address on the PC network interface.
Connect the DS100 and the computer to the same Ethernet
network.
Recommended and tested browsers
Windows:
▪ Firefox V22.0 or higher
▪ Microsoft Internet Explorer V11 or higher
▪ Microsoft Edge V12 or higher
▪ Google Chrome V21 or higher
▪ Opera V15 or higher
macOS: ▪ Safari V6.0 or higher
▪ Firefox V22.0 or higher
▪ Google Chrome V21 or higher
▪ Opera V15 or higher
iOS:
▪ iOS 6 or higher
Android:
▪ Mobile Firefox V27.0 or higher
▪ Android Browser V4.4 or higher
Physical setup
Simply connect the LAN connector port of your computer to the
ETHERNET [2] connector of the device.
Direct connection
To enable access via the Web Remote interface, proceed as
follows:
By factory default, the IP address is set to
192.168.1.100
.
To access the device, manually assign an IP address to the
computer in your network in the same subnet as the device.
Proceed as follows:
1. Navigate to the network settings of your computer associated
with your network adapter.
2. Open the corresponding network properties dialog.
3. Enter a static IP address in the same subnet as the device:
IP address: e.g.
192.168.1.101
Subnet mask:
255.255.255.0
4. Confirm the changes and close the network properties dialog.
5. To display the Web Remote interface page of the device,
enter its IP address in the address bar of your web browser.
Þ
192.168.1.100
5. Initial setup
d&b DS100 Manual 1.3 en 14