Dancover Titanium Tent, Руководство пользователя

Страница: 3 / 16

Assembly Procedures
ground condition is suitable.
roof tubes to them accordingly.
3. Make each group of frame straight and assemble the roof purlins and horizontal walls in turn.
Make sure that all screws are tightened enough.
4. Assemble the cross tubes in front and back wall including the tensioning tube for covers at the
bottom.
roof cover onto the bottom tensioning tubes at the both side of frame as per Figure 5.
6. Then please put the rope in the sleeves at the two ends of roof cover into rings on the base
the bottom of the covers to the bottom tensioning tubes.
8. Please connect and tighten ropes between roof cover and front & back cover.
Your assembly is complete.
I