Dancover TITAN Arch 280, Руководство пользователя

Страница: 3 / 30

Dear customers!
If you decide to purchase a greenhouse, you will receive a product, produced
with the greatest possible care, which carcass is made of special galvanized metal
profiles of 1 mm thickness and is very sturdy.
Due to simple structure, a greenhouse is easily collected. The range of various
accessories will provide you with freedom to implement your ideas.
We wish you a lot of joy and success purchasing our produced greenhouse.
Attention!
When assembling the carcass of a greenhouse and working with canal
polycarbonate covering, please always wear protective gloves.
For the assembly of a greenhouse you will need the following tools:
· Hexagonal wrench of 8 mm diameter or an open-end wrench.
· Screwdriver with four-way ferrule or cordless screwdriver.
· Shovel for excavation of pits.
· Level – to measure the evenness.
· Rope - to measure the diagonal.
· Blade – to cut polycarbonate sheets.
If necessary, follow instructions of local construction. In the event of high
winds or storm, please close windows or doors.
Before assembling a greenhouse, you should read the entire instruction at least
one time and to get acquainted with separate sections and profiles. This is an
important additional tool for you.
Check the delivery content according to the detalization of parts. Then sort out
the profiles and store them separately.
During the assembly of a greenhouse, we recommend at first to tighten screws
by hand – not tightly enough, in order to move profiles freely if necessary. Collected
carcass of a greenhouse align with level and then tighten screws securely.