Side 16
Instruction manual
| 6 / 8 | -
Door [0500-500]
6. Port
Hvis porten er en eftermontering: Bor 2 huller (12,5 mm) i bundrammen, som anvist på den medfølgende tegning.
(a) Start med lodrette stolper og juster portpladerne ind.
Vigtigt:
De to lodrette stolper
skal
stå i lod, ellers vil dørene ikke lukke ens i.
Tip:
Justering kan også foretages i taglægterne
(b)
Monter træ og stålplader.
(c)
Lysvinduet saves til hen over porten med håndsaks eller vinkelsliber.
6. Door
If the door is a retrofit: Drill 2 holes (12.5 mm) in the bottom frame, as shown in the accompanying drawing.
(a) Start with vertical posts and align the door panels.
Important
: The two vertical posts must be perpendicular, otherwise the doors will not close the same.
Tip
: Adjustment can also be made in the roof battens
(b) Mount Wood and plates
(c) Saw the light window over the door with hand scissors or an angle grinder.
•
2 Pcs. gable posts
[0500-180]
•
2 Pcs. Door
[2200-115]
•
3½ Pcs. Roof battens in. 6m
[3856-600]
•
4 Pcs. Gable plates
[0500-560]
•
1 pc. Drip rail over the door
[4200-400]
•
100 Pcs. 4,8 x 35 mm
[4000-440]
•
18 Pcs. 8 x 50 mm bolts
[4000-440]
•
4 Pcs. 12 x 30mm machine bolts
[4000-440]
•
1 Pcs. Light window
[20PC-260]
