•
The heater is extremely hot during operation. It keeps hot for a period after shutdown. Potential danger would
occur when touching it during this period.
•
Do not wrap power supply cord on the unit.
•
The heater must be handled with care, no violent vibration or hitting.
•
The heater must be securely grounded during operation.
•
In case of damage, it must be repaired by professional electricians.
•
Keep the heater and its cord out of reach of children less than 8 years.
•
This heater is not equipped with a device to control room temperature. Do not use this heater in small rooms
when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is
provided.
•
CAUTION: some parts of this heater can become very hot and cause burns. Particular attention has to be given
where children and vulnerable people are present.
•
Do not use the heater as a cloth drier or tower drier.
•
Do not use the heater as a sauna heater.
•
Do not use the heater as a room heater.
•
Do not use the heater in place of animal propagating and raising.
•
Do not immerse the heater into water for cleaning.
ASSEMBLY
When unpacking the heater, please make sure that all the items are present and there are no components left in the
box and that all the parts are free from any packing material.
Do not connect the heater to electric supply until all the assembly is done.
Do not connect the heater to electrical supply if any of the components or power cord is damaged any way. In case of
any doubt, please contact your local supplier.
Attachment to a ceiling
1.
Drill a hole with a diameter of 8mm in the ceiling.
2.
Push the self-tapping hook screw in the drilled hole.
3.
Tighten the hook firmly.
4.
Hang the heater with the chain to the screw. Ensure that the distance between ceiling and the heater is at least
30cm. The height between the floor and the heater must be at least 1.8m.
5.
Route the power cable alongside the chain to the socket. The power cable must be attached to the chain with a
pull strap, but make sure it does not make contact with the first three links of the chain. The power cable must
under no circumstances touch the heater. The heater should not be hung up by the power line.