21
20
Manual
Manual
GATE ASSEMBLY
Arrangement of
angles for fastening
of polycarbonate on
the gate.
fig. 7.1
CUTTING LIST OF COVERING OF AN END
fig. 8.1
Cutting list of covering for an end of the
greenhouse 5.0 m wide.
CUT POLYCARBONATE SHEET IN STRICT ADHERENCE TO FIG. 10.3
Honeycomb polycarbonate sheet size 2100 х 12000 MM
2100
2700
2700
2610
2610
2700
2700
12000
1170
1330
remainder
gate
140
140
gate
6000
2100
2610
2610
1330
remainder
gate
gate
2000
3000
cutting line
980
2100
2000
980
2100
3000
cutting line
1490
1490
Install honeycomb polycarbonate with a specified side facing outwards
(sunward); this side has a covering layer (make sure to clarify it on
buying or prior to installation). Covering layer is usually placed on the
side with notations on the shipping film. The film is transparent on the
opposite side of a sheet. After marking the sheet but prior to cutting
it, mark the side with the covering layer on each piece of the sheet:
when the shipping film is removed sheet sides look the same. Shipping
film shall be removed from the both sides immediately before fastening
covering on the frame.
Cut the sheets using a fret saw or a fine-pitch arm saw.
STAGE 8
Installation of covering
