DW MINI EAGLE INSTRUCTION MANUAL
01 Apply the foam glue to the side of the wing,glue the
wings together when the glue is damp-dry,and cut off the
spare parts from the B1.
02 Paste the B3 and B4 parts on the leading and trailing
edge as picture below,make sure the wing is smooth.
03 Insert and glue the reinforcement carbon sheet inside
the spare slot on the wing,and paste the small carbon
sheets on the leading and trailing edge.
04 Assemble the fuselage structure reinforcement from E
boards as picture below.
05 Paste the inter reinforcement onto the EPP A board,and
line up the three points marked out.
06 Paste the upper and lower EPP board of the fuselage
C1,C2 and C3,make sure to keep the shape.
07 Assemble the servo and servo arm inside the
fuselage,and paste the triangle wood at the tail.
08 Paste the tail fin on the triangle wood,and make sure
to keep the V-shape.
B1
B2
CUT
B3
B4
line up the three points
C2
C1
C3
How to Assemble
2
