2.5Glue the lower wing cover, servo hatch and leading
edge E of the wing.
2.6Cut off the aileron, and glue the reinforcement balsa
strips D19.
2.7Cut the leading edge of the wing and aileron edge,to
make sure the wing in curved shape,and polish with sand
paper.
2.4Add the reinforcement pieces D4 at the leading edge
of the wing as picture shown.
2.3Glue the upper wing cover, and make sure the wing is
straight.
A4
A2
A3
A5
A6
D16
D16
Servo horn position
D4
D4
D4
D4
A1
A4
E
A6
D15
B9
A5
A3
balsawood bar
D19
2.8Assemble the wing tips and glue onto the wing.
2.8Assemble another wing in same way, and connect
together the two wings by B20,finally fix with glue at
junctions.
D14
B3
B6
B13
B13
3.Assemble the tail wing and landing gear.
3.1Assemble the tail wing as picture, and connect the D9
D8 by paper hinges.
3.2Assemble the tail wheel and rudder, and connect the
rudder by paper hinges and vertical fin.
3.3Glue the B15 inside the fuselage as picture shown,
assemble the landing gear onto the B15 at the bottom of
the fuselage with self-tapping screws.
D11
D11
B20x2
D12
D10
D9
D8
D13
insert and polish
the block here
4
