Operating Instructions
Wine
Storage
The *
maximum
capacity of
(750ml)
60(350ml) beverage cans.
wine bottles and
*
When stocked as per
instructions
7
Fig
A
Function
instruction
NOTE
In order to achive the
maximum storage capacity
of 27 bottles and 60 beverage
cans.
It will be necessary to
position the bottles alternately
on the upper six shelves,as
shown in Fig A. This will allow
for the storage of four(4)
750ml bottles per rack in each
of the top six shelves,and
three(3) bottles on the bottom
shelf for a total storage capacity
of 27 wine bottles.
2) Left
˖
It will be necessary to
on the upper three shelves,as
shown in Fig B. This will allow
for the storage of eighteen(18)
of the top three shelves,and
six (6) cans on the bottom
shelf for a total storage capacity
of 60 beverage cans.
Fig
B
If too many bottles/cans are put in at
once or the door has not been
closed tightly, the unit will display the
is normal please wait 5 minutes
after you close the door and
“HI” will disappear.
It is normal that the cabinet
shows “HI” or “LO” from time to time,
long time, you can restart the unit by
unplugging it. If the problem
occurs once again after restart,
previous temperature settings, and when the power is restored the
cabinet temperature will go back to the same setting temperature as
before.
If inner temperature is higher than 74°F(23°C), “HI” is shown
in the display panel, and the alarm will sound after one hour.
It informs you that the inner temperature is too high, please
check the reason. If inner temperature is lower than 34°F(1°C),
“LO” is shown in the display panel and the alarm will turn on.
position the cans alternately
350ml cans per shelf in each
the DBC7070BLSST is 27
In the event of a power interruption the beverage center can remember the
•
• T
Te
emperature Memory Function
mperature Memory Function
•
• T
Te
emperature Alarm Function
mperature Alarm Function
If the door is not closed completely the alarm will sound after
loss of cold energy.
• Door Ajar Alarm Function
1) Right
˖
5 minutes. Please close the door completely to avoid the
please contact customer service.
If it occurs frequently or lasts for a
"HI" signal in the display panel. This
