Danby Millenium Chill'n Tap DKC445BL Скачать руководство пользователя страница 14

12

CONVERTING THE CHILL 'N TAP KEG COOLER TO A BASIC "ALL REFRIGERATOR":

The Chill 'N Tap Keg Cooler is designed to offer you quick and easy conversion from a beer dispensing
unit to a basic compact "All Refrigerator" application. Simply follow the below steps;
1.

Close the main valve on the CO2 cylinder.

2.

Close the secondary shut-off valve (horizontal position) on the regulator stem pipe.

3.

Close the connection between the beer keg and the keg coupler by pulling and lifting the handle into 
the upright position.

4.

Disconnect both the beer line and CO2 air line from the keg coupler.

5.

Remove the beer keg and keg stand from the cabinet.

6.

Disconnect the air line from the CO2 cylinder.

7.

Remove the CO2 air line from the cabinet.

8.

Install the air line rear cabinet plug.

9.

Remove the beer tower assembly from the cabinet by grasping the center of the tower making a ı 
turn counter clockwise and lift. (pull the beer line through the top of the cabinet)

10. Install the "Chill 'N Tap" cabinet plug. (worktop)
11. Install the (2) cantilever wire shelves onto the factory installed cantilever support brackets located on 

the rear wall of the refrigerator cabinet.

12. Adjust the refrigerator temperature as required.

The conversion process is now complete. Please make sure all Chill 'N Tap accessories removed are 
stored in a safe place for future use.

Description

Part No.

Beer Faucet Lock. 

#445-7703    

Beer Line Cleaning Kit.

#445-5571

Description

Part No.

Crisper Drawer

#452.1C

Crisper Cover

#452.28

Additional Wire Cantilever Shelf

#452.33

For more details on purchasing any of the above listed accessories, please contact our after 

sales service department at 1-800-26-DANBY (1-800-263-2629).

OPTIONAL ACCESSORIES FOR CHILL 'N TAP KEG COOLER:

OPTIONAL ACCESSORIES FOR ALL REFRIGERATOR:

Afully charged (5lb).CO2 cylinder will service (approx.):
Q u a n t i t y.

Keg Size.

20                 

30 Liter Kegs (1/4 Barrels)        

2 5

20 Liter Kegs (1/6 Barrels)

For the location of a CO2 supplier in your area, 

(re-fills) please look in your "Yellow Page" 

telephone directory under "OXYGEN" suppliers. 

ADDITIONAL INFORMATION ON CO2

Содержание Millenium Chill'n Tap DKC445BL
















Отзывы: