background image

OPERATING INSTRUCTIONS

5

REMOTE CONTROL 

1. Mode Button:

 Used to choose the operating 

mode.

2.  Energy Saver Button:

 Used to set the energy 

saver function.

3. Sleep Button:

 Used to set the Sleep function.

4. LED Button:

 Press to turn the LED back light on 

or off.

5. Clock Button:

 Press and hold the button for 

3 seconds in order to set the clock. Press the 
Up and Down Arrows to adjust the time in 10 
minute intervals 

Note:

 The clock feature is only available on the 

remote, the appliance does not have a clock. The 
remote clock is a 24 hour clock only.

6. Cancel Button:

 Cancels current Timer settings.

7. Timer Button:

 Used to set the auto on and auto 

off timer.

8. Fan Button:

 Used to set the fan speed. The fan 

can be set to Low, Medium, High and Auto.

9.  Up and Down Arrows:

 Used to adjust the set 

temperature and the timer function.

10. Default  Button:

 Press to restore the remote 

control default settings.

11. Lock  Button:

 Press this button to lock the remote 

control and prevent the settings from being 
inadvertently changed.

FEATURES

1. Control panel

2. Air outlet

3. Air inlet

1

2

3

CONTROL PANEL

1.  Energy Saver Button:

 Used to set the energy 

saver function.

2.  Up and Down Arrows:

 Used to adjust the set 

temperature and the timer function.

3. Display Panel:

 Displays the set temperature, the 

ambient temperature and the timer settings. To 

change the temperature scale being displayed, 

press the up and down buttons at the same time.

4. Sleep Button:

 Used to set the sleep function.

5. Filter Button:

 The indicator light will illuminate 

as a reminder to check the fi lter. Once the fi lter 

has been cleaned, use this button to resume 

operation.

6.  Remote control receiver

7. Mode Button:

 Used to choose the operating 

mode.

8. Timer Button:

 Used to set the auto on and auto 

off timer.

9. Fan Button:

 Used to set the fan speed. The fan 

can be set to Low, Medium, High and Auto.

10. Power  Button:

 Used to turn the appliance on or 

off.

Fan 

Mode

Sleep

TEMP/TIMER

Timer

Check

Filter

Energy

  Saver

Auto

High

Med 

Low

On

Off

Auto

Fan

Cool

Dry

TEMP/TIMER

1

2

3

4

5

6

7

10 11

8

9

Содержание DTAC080BAUWDB












Отзывы: