1. Power
Button:
Turns the unit on.
2. Mode
Button:
Each time the button is pressed, the operation mode changes in the following sequence:
COOL
DRY
FAN
3. Temperature
Adjustment
Buttons:
Push these buttons to increase or decrease the indoor temperature setting by
1°C (1°F) increments. When the unit setting is on “Timer,” press these buttons to adjust the time. Note: When the unit
is off, the display on the remote will show the
set temperature.
4. Fan
Button:
Used to select the fan speed in four steps:
AUTO
•
After selecting, Cool or Fan mode, pressing the fan button will allow you to set your desired fan speed.
5. Sleep
Button:
Select this function if you want the unit to maintain a comfortable setting and save energy while you
sleep. The temperature setting will increase by 1°C (2°F) over the next hour and by another 1°C (2°F) over another
hour.
Operating Instructions
REMOTE CONTROL
6. Timer Button:
When the unit is on, press the timer button to set the “Timer off” function. The “ ” and “.5H” icons
will start
fl
ashing. Within 5 seconds, press the up and down buttons to adjust the time to indicate when you want the
unit to shut off. Release the button after you have achieved the time you desire. Then press the “timer” button again
to con
fi
rm. The “ ” and “.5H” buttons will stop
fl
ashing.
When the unit is off, press the timer button to set the “Timer on” function. The “ ” and “.5H” icons will start
fl
ashing.
Within 5 seconds, press the up and down buttons to adjust the time to indicate when you want the unit to turn on. Re-
lease the button after you have achieved the time you desire. Then press the “timer” button again to con
fi
rm. The
“ ” and “.5H” buttons will stop
fl
ashing.
Note:
Pressing the up or down button will increase or decrease the time by 0.5h, holding the up or down button will
allow you to change the time more rapidly.
To cancel the timer, press the “timer” button once to review the remaining time, within 5 seconds press “Timer” again
to cancel the timer function.
Child Lock Function:
You may lock the remote from being used by pressing the “
” and “
” buttons simultaneously on the remote. The lock
indicator will illuminate on the remote display. To turn the lock off, press the “
” and “
” buttons simultaneously again.
Note:
The Child Lock Function is only available for the remote control. If the child lock is on, the buttons on the units con-
trol panel
still
function normally.
Note:
When the Child Lock is initiated, the unit does not beep to indicate it is locked, the only indicator is the illumination
arrow on the display panel.
Note: (While the unit is OFF) To change the unit from °C to °F, press the “
” and “
” button simultaneously.
Note: To turn the LED display on/off, press “
” and
simultaneously.
11
