3
The WARNING instructions issued in this manual are not meant to cover all possible
conditions and situations that may occur. It must be understood that common sense,
caution, and carefulness are factors that cannot be built into all appliances. These
factors must be supplied by the person(s) installing, maintaining, or operating the
appliance. Failure to install, maintain, and/or operate the equipment according to the
manufacturer’s instructions may result in conditions which can produce bodily injury
and/or property damage. Contact your dealer, service agent, or the manufacturer
about any problems or conditions you do not fully understand.
For Danby Customer Service call 1-800-26-
/ 1-800-263-2629
To reduce the risk of fire or explosion, do not store or use gasoline or other flammable
vapors or liquids in the vicinity of this or any other appliance.
To reduce the risk of fire, electric shock, or personal injury, all
wiring and grounding must conform with the latest edition of
Local and National Electrical codes.
It is the customer’s responsibility to have the wiring and fuses checked by a qualified
electrician to make sure adequate electrical power is available.
This appliance is designed to operate on a separate branch, polarized, three-wire,
effectively grounded 120 Volt 60 Hertz (alternating current) circuit protected by a 15
ampere fuse, equivalent fuse or circuit breaker.
The three-prong grounding plug on the power cord should be plugged directly into a
polarized, three slot, effectively grounded receptacle rated 110/120 V.A.C.
Improper connection of the equipment-grounding conductor can
result in a risk of electrical shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether your
appliance outlets are properly grounded.
• This appliance must be grounded. In the event of malfunction or breakdown,
grounding will reduce the risk of electrical shock by providing a path of least resistance
for electrical current. This appliance is equipped with a cord having an equipment-
grounding conductor and 3 prong grounding plug. The plug must be connected into an
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
• Do not modify the plug provided with this appliance. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
• If the household electrical supply does not meet the above specifications, or it you
are not sure your home has an effective ground, have a qualified electrician or your
local electrical utility company check it and correct any problems.
WARNING- IMPORTANT NOTICES
NOTE
FOR YOUR
SAFETY
ELECTRICAL SERVICE
INFORMATION
GROUNDING
INSTRUCTIONS
