background image

UNBOX THE DEHUMIDIFIER

Take out the device from its packaging and 
allow to stand upright for 6 hours particularly 
if the device was placed on its back or side.

Connect the power cord buckle in the bucket 
to the back of the unit.

Open water bucket, remove the tape or 
Styrofoam from bucket float. (Unit will not 
work otherwise).

POSITIONING THE DEHUMIDIFIER

2

Ensure that the device is placed on a smooth, 
level floor that is strong enough to support the 
appliance with a full bucket of water.

Allow at least 20cm of air space on all sides of 
the unit for good air circulation (at least 40cm 
of air space on air outlet).

For effectiveness, this is to be used in enclosed 
spaces only.

Call us 1-800-263-2629

[email protected]

SETUP

QUICK-START GUIDE

 FOR DEHUMIDIFIERS:

 

DDR050BJPWDB | DDR050BJPWDB-6

3

Take out the water bucket and remove accessories
that might be contained in the bucket. Remove tapes 
or Styrofoam (where applicable) from bucket float. 
(Unit will not work otherwise)

A C C E S S O R I E S

Pump drain hose

Power cord buckle

Direct drain hose 

(flexible PVC hose)

Direct drain connector

Отзывы: