Tel: 1-800-26-DANBY (1-800-263-2629)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Does not work
• No power to unit
• Power cord is unplugged
• Wrong voltage is being used
• Check connection of power cord to power
source
• Plug in unit
• Use proper voltage
Freezer runs
continuously
• Temperature set too low (too
cold)
• Lid is not closed
• Hot food was inserted
• Lid opened too long or too often
• Close proximity to heat source
or direct sunlight
• Set temperature control to warmer setting
• Close lid securely
• Be sure food is at room temperature be-
fore inserting
• Minimize lid openings / duration
• Do not place unit close to heat sources or
direct sunlight
Internal tem-
perature not
cold enough
• No power to unit
• Power cord is unplugged
• Temperature set too high
• Lid is not closed
• Hot food was inserted
• Lid opened too long or too often
• Air
fl ow obstruction
• Wrong voltage is being used.
• Close proximity to heat source
or direct sunlight
• Check connection of power cord to power
source
• Plug in unit
• Check setting and increase as needed
• Close lid securely
• Be sure that food is at room temperature
• Minimize lid openings / duration
• Allow room for air to circulate around unit
• Use proper voltage
• Do not place unit close to heat sources or
direct sunlight
Troubleshooting
5
VACATION
For short vacation periods, leave the unit at its regular setting. During longer absences:
1. Remove all foods.
2. Disconnect the power cord from the electrical outlet.
3. Defrost and clean the freezer thoroughly.
4. Leave the lid open to avoid possible formations of condensation, mold or odors.
MOVING
Remove or securely fasten down all loose items inside the unit. To avoid damaging the levelling legs,
turn them all the way into the base.
If it is necessary to transport the unit on its back or side, ensure that the unit is allowed to remain up-
right and undisturbed for a minimum of 4 hours to allow the coolant to settle.
Operating Instructions