9
OPERATING INSTRUCTIONS
CONTROL PANEL
1. Fan speed:
press the fan speed button to set the fan speed. In cool mode the fan can be set to high,
medium, low or auto. In fan mode the fan can be set to high, medium or low.
2. Eco mode:
this mode can be used to save electricity. In eco mode, the air conditioner will turn off once
the desired temperature is reached and will not turn on again until the temperature in the room exceeds
the set temperature. While in eco mode the fan may turn on periodically for a few seconds to take an
accurate temperature reading.
3. Modes:
press the mode button on the control panel to cycle and select a mode or press the desired
button on the remote.
• Auto
mode:
in auto mode the air conditioner automatically choose the mode of operation (cool, dry
or fan) based on ambient conditions.
• Cool
mode:
cool mode allows the air conditioner to cool the room and reduces air humidity. Adjust
the fan speed and air temperature to your desired comfort level. In this mode, if Eco is not enabled,
the fan may continue to run after reaching the desired temperature.
• Fan
mode:
used to run the fan only. Fan mode only works when the air conditioner is vented.
• Dry
mode:
only available by pressing the mode button on the control panel. This mode reduces the
humidity in the air. When in use, a function of alternating cooling and fan cycles is activated.
4. Filter button:
after the fan motor runs for 500 total hours, the fi lter check light will turn on to remind you
to clean the fi lter. After cleaning the fi lter, turn off the light by pressing the fi lter button.
5. Sleep button:
in sleep mode the air conditioner will automatically adjust the temperature and fan
speed. The set temperature will raise every 30-60 minutes and at most will change 6 times until the set
temperature is 81 or 82 degrees.
6. Timer:
press the timer button to set the timer.
• Set timer on:
with the air conditioner off, press the timer button and use the up and down arrows
to set the desired temperature. Press the timer button again and use the up and down arrows to
set the amount of time before the air conditioner turns on. Press the timer button again to start the
countdown.
• Set timer off:
with the air conditioner on, press the timer button and use the up and down arrows to
set the amount of time before the air conditioner turns off. Press the timer button again to start the
countdown.
• The timer can be set from 0.5 - 24 hours. The up and down buttons will change the timer in 0.5
hour increments below 10 hours and in 1 hours increments above 10 hours.
7. Up and down buttons:
used to set the desired temperature or the timer function.
8. Power button:
used to turn the air conditioner on and off.
1
2
3
4
5
6
7
8
