Danbit MB800, Руководство пользователя

Страница: 46 / 70

BIOS SETUP
42 MB800 User’s Manual
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the motherboard and you wish to use it. If you install an
add-in FDC or the system has no floppy drive, select Disabled in this
field. This option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1 3F8H/IRQ4
Serial Port 2 2F8H/IRQ3
Serial Port 3 3E8H/IRQ5
Serial Port 4 Disabled
Parallel Port 378H/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is
Normal . Other options include IrDA and ASKIR .
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP Standard Printer Port
EPP Enhanced Parallel Port
ECP Extended Capabilities Port
PWRON After PWR-Fail
This field sets the system power status whether on or off when power
returns from a power failure situation.
Midi Port Address
The option settings for this field are 330, 400 and Disabled . The default
setting is 330 .
Midi Port IRQ
The default Midi Port IRQ is 10 .
Digital I/O Address
This field enables or disables the Digital I/O address.