
CLiP
5
Turning on and off
Your Danalogic Clip
Bodyworn is equipped
with an on/off switch.
Turn your hearing
instrument on by pushing
the on/off switch down,
and turn your instrument
off again by pushing the on/off switch up.
When first turned on, your Danalogic Clip hearing
instrument will always start in programme 1. To read
more on this subject, turn to page 12-13.
it is recommended that you turn your hearing instrument
off and open the battery door when you are not using it.
This will increase the battery life as well as increase the
life span of the hearing instrument.
low Battery Warning
The hearing instrument has a soft low-battery-warning
signal (beep-beep) that you will hear when the battery
voltage/power gets too low. The low-battery-warning
signal will be repeated every 5-10 minutes until the
battery runs out of power. The instrument will then
automatically switch off.
it is recommended that you always carry a spare battery
with you and replace the battery as soon as you hear the
low battery warning signal.
There is also a battery light indicator which will warn you
when the battery voltage/power gets too low.
Содержание Clip
Страница 1: ...CLiP User Guide Danalogic Clip Bodyworn...
Страница 22: ...CLiP 22 Technical Data Maximum Output 2cc Coupler IEC 60118 7 Danalogic Clip 145 dB SPL Typical...
Страница 23: ...CLiP 23...