Danalogic Ambio, Руководство пользователя

Страница: 21 / 60

21
NOTE:
If there is no sound from the hearing aids in a hearing loop
system and an active Telecoil programme, the hearing loop system
may not be turned on or is not operating correctly.
NOTE:
The sound from the hearing loop and the hearing aids’
microphones can be mixed to your preference - either during the
fitting session or via your smartphone app or your Remote Control 2.
8.2.1 Hearing loop systems
To use hearing loop systems, follow these steps:
5. Switch your hearing aid to the Telecoil programme
6. Find a good spot. Reception is not clear in all locations; it depends on
the hearing loop. Look for signs or find another spot to sit
7. If needed, adjust the volume
8. When you leave, switch to your preferred programme
8.2.2 HAC telephone
Some smartphones are hearing aid compatible (HAC). The HAC phone
establishes a small hearing loop that your hearing aids connect to.
Switch to the Telecoil programme if you want to use a HAC phone.
The telecoil picks up the HAC telephone’s signal and converts it to sound.
To use the HAC telephone, follow these steps:
1. Switch your hearing aid to the Telecoil programme
2. Pick up the telephone and place a call or answer a call
3. Hold the telephone close to the hearing aid, and tilt it slightly
outwards
4. Listen to the dial tone and move the telephone to get the best
reception
5. If needed, adjust the volume
6. When you hang up, switch to your preferred programme