Danalock V3 US Easy install
page 1/2
1. Download the Danalock app
Go to Google Play or App Store
and download the Danalock App.
When the app is installed you
create a user profile by pressing the
blue ring. You will use this profile
each time you sign into the app.
You will need to finish setting the
Danalock up in the app after
mounting it on the door.
2. Get your tools together
To install the Danalock,
you’ll need a Phillips
screwdriver and tape,
preferably masking tape.
Should you need to
remove or readjust the
lock, a pen tip or paper
clip will be needed.
3. Check door alignment
Ensure that your door is
properly aligned before
beginning installation.
You should be able to lock
your door without pushing,
pulling, or lifting the door.
Thumb-turn
must move and
lock smoothly.
4. Secure outside keyhole
Before removing your
existing lock, use tape to
secure the outside
keyhole. This will keep it
in place as you remove
the screws on the inside.
5. Remove inside thumb-turn
Remove the inside thumb-turn,
leaving just the deadbolt and
tailpiece remaining.
Set aside the screws. You’ll
reinstall them in step 7.
6. Select a backplate
Find the backplate that
matches the brand of
your existing lock.
Deadbolt
Tailpiece
Thumb-turn
Thumb-turn
screws
Tailpiece adapters
Bridge
Danalock V3
B
D
efia
nt
Schlage, Weiser
Back plate
B
D
efia
nt
Schlage, Weiser
A
Omnia, Weslock
C
Baldwin,
Emtek, Kwikset
A
Omnia
Weslock
B
Schlage
Weiser
C
Baldwin
Emtek
Kwikset
