danalock V3 US, Руководство по монтажу

Страница: 23 / 24

Page 23
19. How to operate the Danalock V3 with click-commands
You can control the Danalock via a switch reached through the
small hole on top of the lock. You have 5 seconds before the
Danalock engages the activity, giving you plenty of time to click
the switch the right number of times. Notice: If you make a wrong
number of clicks you can cancel by clicking 7 times.
Clicks: Colour: Activity:
1x Green Set the Danalock in ex/inclusion mode (Zigbee,Z-Wave)
When you need to set the Danalock in ex/inclusion mode, click the switch one
time, wait 5 seconds until the Danalock blinks green. Now it is in ex/inclusion
mode and you have 30 seconds to pair the Danalock with a gateway.
2x
Yellow Manual calibration (Start by turn to unlock)
Turn the Danalock completely into unlocked position, then click twice. Wait 5 seconds
until it flashes yellow, then turn the Danalock into locked position and click once.
3x White Auto calibration
Turn the Danalock manually until the door is unlocked and leave the door open while
calibrating. Lift the handle if needed. Now click 3 times, after 5 seconds the Danalock
will calibrate.
7x
Cancel
If you make a wrong number of clicks you can cancel by clicking 7 times.
10x
Red Reset the Danalock
This action will delete all settings in the Danalock. Click 10 times, wait 5 seconds
- now the Danalock blinks red and reset.