Once the Danalock V3 has been removed, see
To pair a Danapad with a Danalock V3 Smart Lock
.
The Danapad will not go into pairing mode. What do I do?
If the Danapad only flashes green once instead of blinking red and green after holding down the unlock button for 5
seconds, then the Danapad is not entering pairing mode. Verify the Danapad has the latest firmware. If it does not,
see
How do I update the firmware on a Danalock V3 or Danapad?
.
The Danalock V3 will not go into pairing mode. What do I do?
If the Danalock V3 does not blink red and green after pressing the top button 7 times, then the Danalock V3 will not
enter pairing mode. Verify the Danalock V3 has the latest firmware. If it does not, see
How do I update the firmware on a
.
How do I identify which Danalock V3 the Danapad is paired to?
1. Put the Danapad into pairing mode.
2. Hold the unlock button for 5 seconds.
3. The Danapad will blink red and green to indicate that it is in pairing mode and awaiting user input.
Note
: The Danapad will time out and exit pairing mode after 60 seconds without user input.
4. Press
[3]
on the Danapad to identify which Danalock V3 it is paired to. The paired Danalock V3 will blink white.
I enrolled and paired the Danalock V3 and Danapad using the app. What do I do now?
The Danalock V3 and Danapad need to be deleted from the Danalock app. To do so:
1. Log into the Danalock app.
2. Tap
Device
.
3. Tap
Delete Device
.
Updated: Sat, 11 Sep 2021 05:59:47 GMT
4
