danalock Danapad V3, Руководство пользователя

Страница: 23 / 28

23
Simple Guidelines
Please follow these guidelines when confi guring, using or recycling the PADV3-BT. Violating these guidelines may be dangerous,
illegal or otherwise detrimental. Further detailed information is provided in this manual.
Terms of use
The PADV3-BT is designed for outdoor use. This equipment is designed for use with the other danalock products V3 or UMV3 locks
as an access panel in order to operate the lock by entering a security code. The PADV3-BT is normally mounted outside next to the
doorframe on the wall.
Do not connect incompatible products, and do not operate the PADV3-BT where wireless radio communication is prohibited. Like
hospitals, buildings near blasting sites etc.
Do Not Operate Where Prohibited
Do not allow the PADV3-BT unit to operate wherever wireless radio communication use is prohibited or when doing so may cause
interference or danger as the PADV3-BT cannot be turned off after installation.
Device Operation and human exposure to electromagnetic fi elds
The PADV3-BT unit is a low power radio transmitter and receiver. Periodically the PADV3-BT wakes up either due to activity or by a
timer. When it is ON, it receives and sends out radio frequency (RF) signals for a short period of time.
Specifi c Human Absorption Ratio (SAR)
The PADV3-BT unit is not intended for handheld use or to be worn on the body. A minimum separation of eight (8”) inches (20 cm) is
to be maintained between the PADV3-BT and any persons’ body when mounted on the wall.
Interference
Like all wireless devices, the PADV3-BT may encounter electrical interference that may aff ect its performance. The PADV3-BT is tested
and certifi ed according to international and European standards. The performance hereof ensures correct operation in the presence
of electromagnetic interference and/or electrostatic discharge.
Category of use
The PADV3-BT radio interface is an accessory to other Danalock products and will only work together with these products.
Security for electrical functions
The PADV3-BT has no indications, sound alarms in case of a connected lock malfunction.
Security for electrical manipulation
The PADV3-BT is tested compliance to the EMC requirement laid out in the 2014/53/EU directive. The performance hereof ensures
correct operation in the presence of electromagnetic interference and/or electrostatic discharge.
Children
The PADV3-BT series and its accessories are not used to solicit data from or market to children