DANALOCKV2-BTZU-X
Danalock DANALOCKV2-BTZU-X, Technical Manual v.1.2, December 2015
Page 17
Approvals and certificates
The DANALOCKV2-BTZU-X product is certified according to the following radio
recommendations (US/Canada):
The DANALOCKV2-BTZU-X is certified for electromechanically operated locks and striking
plate’s classification matrix (N/A is not applicable for DANALOCKV2-BTZU-X):
FCC and IC Statements
The DANALOCKV2-BTZU-X product contains radio transmitters that comply with CFR 47
Part 15.247 and Part 15.249 of the FCC rules and with RSS-GEN, RSS-102, RSS-210 and
RSS-247 of Industry Canada requirements.
Notice statements according to CFR 47 Part 15.19 / RSS-GEN:
The DANALOCKV2-BTZU-X product complies with Part 15 of the FCC rules and with
Industry Canada license exempt standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Déclarations selon le CFR 47 section 15.19 / RSS-GEN:
Le présent DANALOCKV2-BTZU-X appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
NOTICE statements according to CFR 47 Part 15.21:
Changes or modifications made to this equipment not expressly approved by Poly-Control
ApS may void the FCC authorization to operate this equipment.
FCC-ID: 2ADSH-DANALOCKV2U
IC-ID: 12588A- DANALOCKV2U
