6 mm
INSTALLATION
5. Fasten bracket into the pre-drilled holes.
6. Connect the soft rubber tube to the outlet of the pump,
and place the pump into the soap container.
7. Connect the tube to the pump and the cables to
the control box.
4. Use a template to drill the holes for the bracket. Install
bracket close to Soap/Foam Tap; behind a wall, in a
cabinet, or under the sink
.
8. Insert soap container 1.5 or 3 L. Confirm the container is
placed correctly to activate the dispenser. The fork should
be on top of the disc at the pump top.
INSTALLATION
9. Connect 6 V DC power supply to control box.
6
7
