23
3. Establishing a connection and reconnecting the
S-Cubes back into the Home Cinema System.
Charging your S-Cube
1
2
3
4
5
Power on the S-Woofer
& S-Bar with the remote
control.
Charge your S-Cube using
the power adaptor provided.
Red/Light blue blinking –
charging and in JetStreamNet
mode (ready to connect to other
S-Cubes or the S-Bar S-Woofer)
Red/Dark blue – charging and
connected to a Bluetooth device.
When your S-Cube is fully charged, the
red LED will not display.
Change the mode on the
S-Cube(s) to JetStreamNet
(light blue) with a short tap
of the power on button. Wait
for a few seconds and the
LED in the d logo will change
to light blue.
On the left surround speaker
change the output switch to
triangle.
On the right surround
speaker change the output
switch to square.
Short press the Pairing button on the S-Cube and the JSN/
pair button on the remote control at the same time, pressing
for less than 3 seconds. If you are playing content on the
system you will visibly hear music coming from the S-Cube
once it has reconnected.
DC
AUX
PLEASE NOTE:
when an
S-Cube is connected to the mains
but turned off, it is in a state of
‘deep sleep’. It can be turned
on using the remote. When an
S-Cube is not connected to the
mains and not powered on, it is in a
state of ‘hibernation’. To turn it on,
press the “power on” button on
the S-Cube. It will not turn on with
the remote control.
