Damp2Dry PACD200, Руководство пользователя

Страница: 14 / 16

-12-
WarnInG: DO NOT attempt to rectify errors using unqualified personnel.
To remedy the following errors, a qualified professional is required.
noTe: With any error code, it is suggested to turn the unit off, wait five
minutes, and then turn the unit on again. If the error code is still present, a
qualified professional is required to fix the problem.
CoDe meanInG
DIsplay
reaDInG
soluTIon*
E1 Coil sensor
error
Flashes every
30 seconds
Replace coil sensor. Call for
replacement part.
E2 Humidity
sensor error
Flashes every
30 seconds
Replace humidity sensor. Call
for replacement part.
E3 Low or no
refrigerant
Flashes
continually
Turn the unit off, wait 5
minutes, and power the unit
ON. If E3 shows again within
15 mins after turning the unit
back on, then we can confirm
the unit refrigerant leak
requires professional repair.
Call your local HVAC repair
shop for assistance.
E4 Water pump
fault or
blockage
Flashes
continually
Dehumidifier will turn OFF
automatically. Check for
blockages in the water hose. If
there are no visible blockages,
the pump or water pipe may
need to be replaced.
error CoDes
*NOTE: If the error occurs within one year from the date of purchase,
contact Consumer Services at 877-365-6274 for warranty assistance
prior to contacting a repair person. You must have the original
purchase receipt for warranty assistance.