Damon avanti, Руководство пользователя

Страница: 42 / 104

42
The termination compartment has many operations. Listed below are the fixture call
outs and functions:
Gloves.
City Water Connection. Connect to direct water source.
Sewer holding tank flush attachment. Attach the city pressure hose and allow the
water to flow for three minutes. Be sure to open the termination valves and have the
sewer hose attached and draining into an approved waste disposal system.
Swan Valve. With the city water hose attached and the handle in the 12 o’clock
position, valve will provide pressurized water for the motorhome. With the handle in
the 9 o’clock position, the valve will pressure fill the fresh water tank. Be sure to check
the monitor panel for tank filling progress, and turn off that valve when tank is full.
Compartment light. This is controlled by the compartment light switch at the entry
door.
Soap Dispenser. To clean your hands and any other appliance in this area.
Exterior shower head. For washing animals, hands, sewer hose, or any exterior
cleaning job.
Termination cap. Remove this to install the sewer hose. Be sure that the termination
valves are closed before removing this cap.
Low point drains. Use these to drain your water tank and lines in preparation for
winterization.
Termination valve handle. To open, grab handle, and pull outward. Make sure that
the drain hose is connected.
Hatch cover. Open this and pass your city pressure hose through. Close with hose
passing through small opening in the cover.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Chapter 6 - Plumbing Systems
TERMINATION
COMPARTMENT
COMPONENTS
1 2 4
10
3
11