PALACE BIT
12
Mixers care recommendations
Follow the instructions of the manufacturer of cleaners, as well as the following rules for their use:
1. Use cleaning agents when required, according to the instructions for use.
2. The dosage and duration of treatment with cleaning agents should be selected taking into account
characteristics of the product (mixers should not be exposed to cleaning agents longer than required).
3. Regular care can prevent calcification.
4. When using aerosol cleaners, spray them onto a special cloth or sponge and never direct directly onto
plumbing equipment, since droplets of the aerosol can damage it by hitting the holes or slots in the
equipment.
5. Immediately after cleaning, wash off the chemicals with clean water in order to completely get rid of
the residues of the product.
Important notes
Any residual liquid soap, shampoo or shower gel can also cause damage. To avoid this, wash them
thoroughly with clean water. The impact of cleaning products on damaged surfaces increases the area
of damage.
Our warranty does not cover any damage resulting from improper handling.
WARNING!
The following specifications of the water supply system are required for normal operation of the mixers:
1. Working interval of pressure in the water supply system is 0.5-0.6 atm (50-620 kPa).
2. Recommended pressure range in the water supply system is 2.0-5.0 atm (206-515 kPa)
3. Difference in pressure values in the hot and cold water supply network can be up to 10%. In case of any
excess values, it is recommended to provide pressure boosting/decompression device.
4. Maximum allowable temperature of hot water + 800С.
5. In order to avoid any mechanical impurities (abrasive particles) getting into the product, it is
recommended to install filters of 100-300 microns.
