damixa Red Blu Sirius 860210000, Руководство по установке

Страница: 14 / 24

RedctBlu
SIRIUS
Ьydamixa-
Basin mixer / kitchen mixer installation
1. Disconnect your water supply system.
2. Connect а flexiЫe pipe to the mixer.
3. lmportantl То prevent damage to the flexiЬle pipe, twist it into the mixer body manually,
do not use any tools or apply extensive force.
4. Attach mixer to а sanitary ware using the supplied fittings.
5. Connect the flexiЫe pipe to water supply system: the right hose to cold water supply, the
left hose - to hot water supply.
6. Before connecting the mixer it is recommended to remove (unscrew) the aerator in order to
prevent its clogging at the first water feed.
7. Start the water supply system with the mixer in «closed» position and make sure that all
connections аге tight. Perform additional connections tightening and sealing if necessary.
8. Open hot and cold water supply for а while, then close water supply and re-install (screw in)
the aerator.
Bath/shower mixer, bath/shower mixer with а long spout / bath/
shower mixer with а long spout and shower set and shower mixer
installation
1. Disconnect your water supply system. Screw eccentric reducers into the water supply
system pipes after sealing the threads with sealing material. Select а position of eccentric
reducers to match and comply with the mixer's connections position. The mixer should Ье
in а horizontal position.
2. Before connecting the mixer it is recommended to remove (unscrew) the aerator in order to
prevent its clogging at the first water feed.
3. lnstall decorative plates оп the eccentric reducers and connect the mixer's body using tools
with soft extensions. lnstall а spout to а bath/shower mixer with а long spout.
4. Start the water supply system with the mixer in «closed» position and make sure that all
connections are tight. Perform additional connections tightening and sealing if necessary.
5. Open hot and cold water supply for а while, then close water supply and re-install (screw in)
the aerator.
6. For bath/shower mixer with а long spout and shower sets attach shower head to the hose
using insertions. Connect the hose to the shower slot оп the mixer body. lnstall wall bracket
for shower head in а convenient place for you.
Warning!
Mixers сап operate normally with the following water supply system specifications:
• Operating pressure interval in water mains is 0.5-6.0 atm. (50-620 kPa).
• Pressure difference in hot and cold water supply systems сап vary up to 10%. lf it exceeds this
value, the pressure increase/decrease instruments installation is recommended.
• Maximum allowaЫe hot water temperature: +80С
°
.
• lnstall 100-300 µ filters to prevent foreign objects (abrasive particles) from getting inside the
item.
14