2
1
3
4
0
780mm –1100mm
bar
2
1
3
4
0
bar
780mm –1100mm
CAUTION/
IMPORTANT
2.0
1.0
3.0
4.0
0
CAUTION/
IMPORTANT
2.0
1.0
3.0
4.0
0
2A.1. Hold Barrier firmly
in position,
pressing
down at Lifting Point
2A.2 Position the Direction Switch
outwards on Ratchet Handle
(towards user)
2A.4 Barrier is secure when
resistance is felt on the
Ratchet Handle,
check
that no movement of
the Barrier is possible
within the reveals. Return
the Ratchet Handle to the
verticle position
STEP 2A: EXTENDING THE SIDE PANELS – SINGLE BARRIER
SECTION C: Installing the barrier(s)
The barrier must be secure at this point, to create watertight seal
2A.5 ‘Max’ extension is
marked
at the top of each side
panel. If the barrier is not
secure at this point, see
Section H Troubleshooting
2A.3 Jack the Ratchet Handle
to extend the Side Panels,
continue until the Barrier is
secure within reveals
2
1
3
4
0
780mm –1100mm
bar
2
1
3
4
0
bar
780mm –1100mm
2
1
3
4
0
780mm –1100mm
bar
2
1
3
4
0
bar
780mm –1100mm
2A.6 Check that the
door closes without
interference.
If there is interference,
see Section H
Troubleshooting
8
CAUTION: WEAR GLOVES TO PREVENT INJURY AT PINCH POINTS
SECTION C: Installing the barrier(s)
STEP 1B: POSITION EXTENSION POLE AND MULTIPLE BARRIERS
1B.2 Remove the lid of the base socket and insert all
extension pole(s) into the fixed base(s). Ensure
extension pole is at right angles to the ground.
Slot into ground and twist/screw into position
to create a watertight seal
1B.1 Clear any dirt or debris from the doorstep and
reveals. For an enhanced seal, double over
filler to create a thick strip and place at each
corner of the doorstep/reveals, in line with
the barrier position. Filler is not needed at
the extension pole (due to the inbuilt
chamfer seals)
1B.2 Wearing gloves, remove the barriers one at a
time from the reusable packaging. Hold the
Barrier firmly in place at the Lifting handles
until securely positioned
1B.3 Position the barriers vertically, between the
reveal and extension pole or between 2
extension poles as relevant (Ratchet Handle
facing inwards).
CONTINUE TO STEP 3,
INFLATE THE SEAL
Help from another person may be needed to lift safely,
lift only at the Lifting Handles marked
9
2
1
3
4
0
780mm –1100mm
bar
2
1
3
4
0
bar
780mm –1100mm
780mm –1100mm
30.7in – 43.3in
780mm –1100mm
30.7in – 43.3in
1100mm –3300mm
43.3in – 129.9in
1100mm –3300mm
43.3in – 129.9in
780mm –1100mm
30.7in – 43.3in
1100mm –3300mm
43.3in – 129.9in
1100mm –3300mm
43.3in – 129.9in
1100mm –3300mm
43.3in – 129.9in
1100mm –3300mm
43.3in – 129.9in
780mm –1100mm
30.7in – 43.3in
ONLY LIFT FROM HERE WHEN MOVING
PRESS DOWN HERE WHEN INSTALLING
NEVER LIFT USING PUMP HANDLE
CAUTION
2.0
1.0
3.0
4.0
0
A
B
The
Dam Easy
®
Extension Pole allows the use of multiple Dam Easy
®
Flood Barriers covering openings
beyond 1.7m/67in wide. The installation
Dam Easy
®
Extension Pole is undertaken in 2 stage
s:
BASE SOCKET INSTALLATION – A one-off installation to secure the base socket into the ground (concrete).
Please note Base Socket installation will need to be carried out prior to proceeding with installation of
multiple barriers.
POLE INSTALLATION – A quick and simple instalation to fix the Extension Pole into the base socket.
2
1
3
4
0
780mm –1100mm
bar
2
1
3
4
0
bar
780mm –1100mm
NOTE: You must push down
firmly on the barrier to ensure
it is tight to the ground.
