MAINTENANCE
LUBRICATION SCHEDULE
Careful observance of the following lubrication schedule is the best preventative maintenance program for
your spreader. We recommend that you establish a firm program to insure lubrication in strict compliance with
the following schedule. Use only good grade pressure gun type grease unless otherwise specified.
Daily Lubrication Schedule
Drive Line
All Models
4 bearings, 2 U joints
Ground Drive 1 bearing, 4 U joints, 2 telescoping tubes
Conveyor Drive
All Models
6 bearings
Ground Drive All Models
2 shaft housings, 2 U joints, telescoping tube, and 2 squirts
of SAE 90 oil into jack crank, oil cap.
Pay particular attention to the daily cleaning and greasing of the telescoping tube assembly.
Weekly Lubrication Schedule
Chains
Oil -- Lubricate Pin Joints with SAE 80-90
PTO Shaft
Grease – 2 U-joints and Slip Tube
Spinner Gearbox
Universal grease on each fitting under spinner hub
Monthly Lubrication Schedule
Drive Shaft Splines Coat with grease or anti-seize compound.
Spinner Gear Box
Check to see that oil level is up to oil level plug. Use SAE 90 oil.
Annual Lubrication Schedule
Wheel
Bearings Repack
Gear Boxes
Drain, Flush and Refill with SAE 90 Oil
MAINTENANCE
Weekly
Wash Spreader
Check Ground Drive Tire Inflation (22 psi)
Correct Belt Tension
Adjust Tension of Conveyor and Drive Chains (see machine checkout)
Semi-Annually
Tighten Loose Bolts
Replace Worn or Failed Parts
Touch-Up Paint
5
Содержание Mobility 100
Страница 15: ...13 ...
Страница 16: ...14 ...
Страница 32: ...VARIABLE RATE CONTROL ELECTRICAL PLAN 30 ...
Страница 38: ......