DALTOOL SAFETY
It is extremely important that you read and
understand all of the safety instructions, the ope-
rating instructions and the maintenance instruc-
tions. If these instructions are not followed, seri-
ous injuries and/or death could occur to you or
to others. Also, failure to read and follow the
enclosed maintenance instructions can lead to
equipment failure, damage to the equipment or
reduced lifetime of the equipment.
SAFETY MESSAGES:
Safety messages are used to inform the per-
son(s) using this equipment of the potential
hazards that could lead to equipment damage,
serious injury or even death. The safety messa-
ges within this manual will be followed by one of
the following (3) three words that identify the
severity of the damage.
It is important that all instructions within this
manual be followed. If the instructions are not
followed serious injuries will occur as well as
death.
It is important that all instructions within this
manual be followed. If the instructions are not
followed it is possible that serious injuries could
occur as well as death.
It is important that all instructions within this
manual be followed. Failure to follow these
instructions can lead to irreparable damage.
DAMAGE PREVENTION AND
INFORMATION MESSAGES:
A Damage Prevention Message is to inform the
user of important information and/or instructions
that could lead to equipment or other property
damage if not followed. Information Messages
convey information that pertains to the equip-
ment being used.
Each message will be preceded by the word
NOTE, as in the example below.
NOTE:
Equipment and/or property damage may result
if these instructions are not followed.
GENERAL SAFETY PRECAUTIONS
AND HAZARD SYMBOLS:
In order to prevent injury, the following safety
precautions and symbols should be followed
at all times!
Safety Precautions:
●
REMOVE ADJUSTING TOOLS.
The machine is supplied with some adjusting
tools for equipment maintenance. It is impor-
tant that the user of the machine makes sure
that all tools are removed or in their proper
storage area before the machine is turned on.
PAGE 4
DALTILE ANGLE GRINDER OPERATING MANUAL V09/2005R1
DG45 27-09-2005 11:01 Pagina 4
