Dalsa X64 Xcelera-HS PX8, Руководство пользователя

Страница: 74 / 91

72
•
Technical Specifications X64 Xcelera-HS PX8 User's Manual
J4: External Signals Connector
The following table defines the signals and the connector pinout. A subset of these signals are also
available on J1. Connect to one or the other but never both when the signal is the same.
J4 Pin Header Numbering Detail
2 4 ...
38 40
1 3 ...
37 39
J4 Signal Descriptions
Description Pin # Pin # Description
Ground 1 2 Ground
General Input 1 + 3 4 General Input 1 -
(all Opto-coupled — see note 1 )
General Input 2 + 5 6 General Input 2 -
General Input 3 + 7 8 General Input 3 -
General Input 4 + 9 10 General Input 4 -
General Output 1 + 11 12 General Output 1 -
(all Opto-coupled — see note 2 )
General Output 2 + 13 14 General Output 2 -
General Output 3 + 15 16 General Output 3 -
General Output 4 + 17 18 General Output 4 -
External Trigger Input 1 + 19 20 External Trigger Input 1 -
(all Opto-coupled — see note 3 )
External Trigger Input 2 + 21 22 External Trigger Input 2 -
Opto-coupled Shaft Encoder Phase A + 23 24 Opto-coupled Shaft Encoder Phase A -
(see note 4 )
Opto-coupled Shaft Encoder Phase B + 25 26 Opto-coupled Shaft Encoder Phase B -
Ground 27 28 Strobe Output 1 (see note 5 )
Ground 29 30 Strobe Output 2
Ground 31 32 Ground
Power Output 5 Volts, 1.5A max 33 34 Power Output 5 Volts, 1.5A max
(see note 6 )
Power Output 12 Volts, 1.5A max 35 36 Power Output 12 Volts, 1.5A max
(see note 6 )
Ground 37 38 Ground
Ground 39 40 Ground
Table 32: J4 Pin Header Pins Detail