Dalsa Rad-icon 1520, Руководство пользователя

Страница: 25 / 37

Rad-icon 1520 GigE User Manual 25
Teledyne DALSA
Camera Information
The following table describes the parameters Display Name as shown in CamExpert and
their feature name, accessibility (RO=ReadOnly, RW=Read/Write, WO=WriteOnly) and
description.
Display Name Feature Acc Description
Manufacturer Name DeviceVendorName RO Displays the device vendor name.
ModelName DeviceModelName RO Displays the device model name.
Device Version DeviceVersion RO
Displays the device firmware
version. This tag will also highlight
if the firmware is a beta or custom
design.
Device Product ID and Build
number
DeviceProductIDBuild RO
Provides the hardware Product ID
and software Build Number
Hardware Revision HardwareRevision RO
Processing board hardware
revision
Serial Number DeviceID RO
Displays the device’s factory set
camera serial number.
MAC Address deviceMacAddress RO
Displays the unique MAC (Media
Access Control) address
Device User ID DeviceUserID RW
Feature to store a user-
programmable identifier of up to
15 characters. The default factory
settings is empty.
Device Reset DeviceReset WO
Resets the device to its power up
state.
Power-up Configuration
Selector
UserSetDefaultSelector RW
Selects the camera configuration
set to load and make active on
camera power-up or reset. The
camera configuration set are
stored in camera non-volatile
memory. (RW)
Factory Setting FactorySetting
Load factory default feature
settings.
UserSet1 UserSet1
Select the user defined
configuration UserSet 1 as the
Power-up Configuration.
UserSet2 UserSet2
Select the user defined
configuration UserSet 2 as the
Power-up Configuration.