Dalsa Piranha4 Series, Руководство пользователя

Страница: 106 / 139

106 Piranha4 2K and 4K Camera Color User's Manual
03-032-20180-06 Teledyne DALSA
Appendix B: ASCII Commands
The following commands can be used to control the Teledyne DALSA Piranha4 cameras.
Accessing the Three Letter Commands (TLC)
To access the TLC an ASCII-based communications interface application, such as HyperTerminal.
Additionally it is possible to use the functions of
clserxxx.dll
or
clallserial.dll
as defined in
the Camera Link Specification.
Figure 36: Serial DLL hierarchy as mentioned in the Camera Link Specification
1. Cycle power to the camera: by either a) issuing the reset camera command (rc), or b) powering
the camera OFF and then ON.
2. Load the ASCII interface using:

9600 baud

8 data bits

no parity

1 stop bit

no flow control

local echo

(carriage return / linefeed)
3. Wait for a stable status LED color (green or red) before proceeding. Note that all entries in
HyperTerminal will be ignored until a stable LED color is obtained.
4. In case of HyperTerminal, press the <ESC> key.
5. Once <ESC> has been entered the help screen appears.