Dalsa PIRANHA CL-P1, Руководство пользователя

Страница: 6 / 40

«CamName» User’s Manual
5
DALSA Corp. 03-32-00253-13
1
Introduction to Piranha
1.1 Camera Highlights
•
512, 1024, 2048, or 4096 element line scan; 10
µ
m square pixels, 100% fill factor
•
Low image lag and high blue response
•
25MHz typical data rate
•
8-bit data, EIA-644 (LVDS) format
•
2 or 4 outputs
•
Exposure control and antiblooming
•
C-mount optics for 512 & 1024 resolutions; F-mount for 2048 & 4096
•
CE Compliant. Operation verified to limits set in EMC standards IEC 1000-4-2; 1995,
1000-4-3; 1995, 1000-4-4; 1995, and CISPR-22.
Design
The Piranha camera uses DALSA’s patented modular architecture. This system of
connecting circuit modules through standardized busses allows DALSA to build a high
performance modular camera using the reliability, flexibility, and cost-effectiveness of
high-volume interchangeable parts. Within the Piranha camera, a timing board (PB-P1-
X206) generates all internal timing and a driver board (PB-P1-X138 for resolutions up to
2048; PB-P1-X139 for 4096) provides bias voltages and clocks to the CCD image sensor.
For enhanced dynamic range, one or two A/D board (PB-xx-D344) process the video and
digitize it to 10 bits before outputting the most significant 8 bits..
1.2 Image Sensor
The Piranha cameras use the IL-P1 and IT-P1 family of image sensors. They are available
with 512 (IL-P1 only), 1024, 2048, or 4096 pixels with 10
µ
m square pixels on a 10
µ
m pitch
with 100% fill factor.