Dalsa Linea ML ML-FM-16K15A, Руководство пользователя

Страница: 62 / 83

62
•
Camera Performance and Features
Rotary Encoder Multiplier rotaryEncoderMultiplier Specifies a multiplication factor for the rotary
encoder output pulse generator. 1.00
DFNC
Beginner
Rotary Encoder Divisor rotaryEncoderDivider Specifies a division factor for the rotary encoder
output pulse generator. 1.00
DFNC
Beginner
Rotary Encoder Rescaler
Order
Multiplier Divider
Divider Multiplier rotaryEncoderRescalerOrder
multiplierDivider
dividerMultiplier Specifies the order that the multiplier and divider are
applied.
The signal is multiplied before been divided.
The signal is divided before been multiplied 1.00
DFNC
Beginner
Trigger Delay TriggerDelay Allows the trigger to the sensor to be delayed
relative to camera input trigger 1.00
DFNC
Beginner
Line Selector
Line 1
Line 2
Line 3
Line 4
Line 5
Line 6 LineSelector
GPIO 1
GPIO 2
GPIO 3
GPIO 4
GPIO 5
GPIO 6 Selects the physical line (or pin) of the external
device connector to configure.
External trigger or rotary encoder A
External direction or rotary encoder B
Output 1
Output 2
Output 3
Output 4 1.00
DFNC
Beginner
Output Line Source
Off
On outputLineSource
Off
On Selects which internal signal to output on the
selected line.
Current output line is set with
outputLineSoftwareCmd
Current output line is configured with
outputLinePulseDelay, outputLinePulseDuration,
and LineInverter 1.00
DFNC
Beginner
Output Line Pulse Delay outputLinePulseDelay Sets the delay (in µs) before the output line pulse
signal. Applicable for the OutputLineSource feature. 1.00
DFNC
Beginner
outputLinePulseDuration outputLinePulseDuration Sets the width (duration) of the output line pulse in
microseconds. 1.00
DFNC
Beginner
Line Inverter
On
Off LineInverter
On
Off Controls whether to invert the polarity of the selected
input or output line signal. 1.00
DFNC
Beginner
Output Line Software
Command
Low
High outputLineSoftwareCmd
Low
High Set the GPIO out value when outputLineSource is
off. 1.00
DFNC
Expert