Dalsa Linea HS Series, Руководство пользователя

Страница: 56 / 74

56

Appendix A: GenICam Commands
Display Name Feature Description Device
Version
& View
Save Calibration flatfieldCalibrationSave Saves the User PRNU set
specified by
flatfieldCorrectionCurrentActiveSet
to the camera. 1.00
Guru
DFNC
Load Calibration flatfieldCalibrationLoad Loads the User PRNU set
specified by
flatfieldCorrectionCurrentActiveSet
to the camera and makes it active. 1.00
Guru
DFNC
Output LUT Mode lutMode Allows the output LUT to be
selected
1.00
Beginner
DFNC
Off Off The output LUT is disabled and
linear data is output
Gamma Correction
Gamma Correction Gamma correction table is used
User Defined User Defined LUT download by the user is
used.
Gamma Correction
gammaCorrection Sets the output LUT gamma
correction factor
𝐷𝑁
𝑜𝑢𝑡
= 255 ×
(
𝐷𝑁
𝑖𝑛
255
)
1
𝛾
1.00
Beginner
DFNC
Image Filter Mode imageFilterMode Enable image filter.
Image Filter Type imageFilterType Read-only: Weighted Average
Image Filter Kernel Size imageFilterKernelType Kernel 1x3 or 1x5
Image Filter Contrast Ratio imageFilterContrastRatio 0 to 1
Image Format Control Category
The camera’s Image Format controls, as shown by CamExpert, group parameters used to configure
camera pixel format, image cropping, binning and test pattern generation features.