Dalsa Linea HS 32k, Руководство пользователя

Страница: 31 / 77

Linea HS 32k CMOS TDI Cameras Camera Performance and Features  31
Area Mode
In Area Mode, the camera operates as an area array camera (16,384 x 128 pixels) using a two
dimensional array of pixels. Area Mode is useful during setup, both for aligning and focusing the
camera.
In sufficiently slow applications, area mode can provide a high-aspect 2D image.
When selecting TDI Area mode, the Device Scan Type changes to Area scan and the height feature
changes to 128, automatically.
Extended Area Mode
In Extended Area Mode each of the three sensor arrays is output as separate imaging planes. Each
output is 16,384 x 128 pixels however as two of the arrays have 64 rows only the bottom half of
these images are blank.
Internal Trigger Mode
See the section Camera Control Category in Appendix A for GenICam features associated with this
section and how to use them
Related Feature:
AcquisitionFrameRate , AcquisitionLineRate
In the different TDI Modes use the following features to set the internal trigger rate:
Table 16: TDI Mode Internal Trigger Rate
TDI Mode Trigger Rate Feature Maximum
32k Modes AcquisitionLineRate 150 kHz
16k TDI AcquisitionLineRate 300 kHz
Area AcquisitionFrameRate 2 kHz
Multi Area AcquisitionFrameRate 650 Hz