Falcon 1.4M100 Camera Manual
31
Falcon Test Power-Up Configuration Dialog
4.6
Camera Output Format
4.6.1
How to Configure Camera Output
The Falcon cameras offer great flexibility when configuring your camera output. Using
the
clm
serial command, you determine the camera’s Camera Link configuration, number
of output taps, and bit depth. Using the
sot
command, you determine the camera’s
output rate. These two commands work together to determine your final camera output
configuration.
Falcon Data Readout Configurations
Camera Link Mode Configuration (Controlled by clm
command)
Pixel Rate
Configuration
(Controlled by
sot
command)
Mode
Camera Link
Configuration
Camera Link Taps Bit
Depth
2 (clm 2)
Base
2 Camera Link taps
8
40 MHz strobe
(
sot
80)
80 MHz strobe
(
sot 160
)
DALSA
03-032-20024-01