Version 06
teledynedalsa.com/ipd
16
When the application is set up and stored on the camera, the Ethernet connection can
be disconnected and the inspection will run autonomously.
The camera can easily store over 500 solutions in its flash storage memory. These
solutions can be switched through network commands, or through established PLC
register connections or through the iNspect
application interface.
The camera administrator can setup user accounts with various levels of access
privilege. With password control enabled, the web server will prompt users for a valid
login and the application will only expose controls associated with that account.
Firmware Upgrading
BOA firmware may need to be updated occasionally to add new features or fix reported
problems. To do this, click on the “Upgrade Device”
hotlink to launch the upgrade
control. To upgrade, simply browse to the location of the upgrade binary file (obtain
from your DALSA representative) on the connected PC and click the upgrade button.
Note: Export your saved solution files before upgrading the firmware.
The upgrade control also supports backup and restore of the entire camera image. This
is useful for safekeeping and camera replication. We highly recommend exporting
solutions after any modification.
After a firmware upgrade, it is recommended that the connecting PC be “cleaned”
of old
or stale components associated with the previous firmware. To do
this, go to the
windows command prompt and enter the “iAssistant”
and click go. When the application
launches, click the “Clean”
button.
