Dalsa 1M30 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 62

background image

36

Pantera 1M60 and 1M30 User’s Manual

DALSA

03-032-10033-09

4.2 Lens Mounts

All F-mount adapters have the appropriate back focal distance for the lens type being
used. Ensure that the image circle diameter of the lens to be used is as great as the length
of the imaging region. The following table provides information regarding the lens mount
used and the back focal distance. The M42 lens adapter originated from the high-end
photography standard. Distances to its inner flat surface and the outer flat surface are
provided.

Table 14: Lens Mounts

Mount

Back Focal Distance (sensor die to adapter)

M42

6.56 ± 0.35mm — outer flat surface

4.3 Mounting the Camera

The Pantera 1M60 and 1M30 can be mounted via the 3/8” deep, 1/4”-20 threaded tripod
mount located on the bottom of the camera.

4.4 Thermal Management

For any CCD camera optimal performance is achieved by transferring heat away from the
sensor. Keeping a sensor “cool” reduces the amount of dark current generated. Dark
current is the leading contributor to FPN, PRNU, dark offset, random noise and other
performance specifications, especially when a camera is significantly gained (i.e. +10db).
Generally, dark current doubles for every 7°C increase in temperature at the sensor and
increases linearly with integration time.

The Pantera 1M60 and 1M30 mechanicals have been optimized to transfer heat from the
sensor to the front of the housing. Mount fans away from the camera to avoid vibration,
and direct the airflow across the housing to decrease the temperature delta between
ambient and housing temperatures. Convection is the ideal method to minimize camera
warm-up times and reduce dark current generation. Both methods: either conduction
through heat sinking, or convection through air flow, greatly reduce dark current and
will improve you systems performance.

4.5 Environment

The camera and cables should be shielded from environmental noise sources for best
operation. The camera should also be kept as cool as possible. The specified operating
temperature is 0–40°C measured at the top of the camera.

«
...
34
35
36
37
38
...
»

Содержание 1M30































































Отзывы:

Нет отзывов

Похожие инструкции для 1M30

Бренд: Zavio Страницы: 10

Бренд: Zavio Страницы: 12

Бренд: Zavio Страницы: 10

Бренд: Zavio Страницы: 32

Бренд: Zavio Страницы: 16

DDF4900HDV Series

Бренд: dallmeier Страницы: 71

smc Pentax-D FA Macro 100mm f/2.8

Бренд: Pentax Страницы: 12

Бренд: Grundig Страницы: 98

Бренд: Kodak Страницы: 2

Бренд: x-pointer Страницы: 13

Бренд: Mio Страницы: 33

Бренд: Connect Страницы: 14

Бренд: GeoVision Страницы: 79

Бренд: Dahua Страницы: 19

Бренд: Turning Technologies Страницы: 3

Бренд: Mikrotron Страницы: 85

Бренд: Tactacam Страницы: 19

Бренд: W Box Technologies Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды