dallmeier Smatrix DMX 1600, Пусконаладка, Страница: 6 / 12

The number of the connections can differ depending on the ordered equipment or device variant. The following description
refers to a device with full equipment and optional connectors.
Connections
6 www.dallmeier.com
Technical Data
Voltage Supply 110/230 V AC +/-10%, 50/60Hz
Power Consumption Max. 80 W
Heat Power Max. 273 BTU/h
Ambient Temperature 5° – 40° C, 20° – 25° C recommended
Humidity 5 – 70 % RH, not condensing
Atmospheric Load Dust-free
Weight Approx. 12 kg (with 10 hard disk drives)
A Power Supply Unit 1 L Not Active
IEC C14 socket, 110 / 230 V AC + / – 10 %, 50 / 60 Hz Weidmüller, 2 pins
B Power Supply Unit 2 M Contact IN Cameras (1-16)
IEC C14 socket, 110 / 230 V AC + / – 10 %, 50 / 60 Hz Weidmüller, 18 pins, only for switch / push button (dry contact)
C Video IN (1-16) N Relay OUT (1-5)
BNC, 75 Ohm, 1 Vpp, with loop-through, CVBS 11 pins on Weidmüller, 18 pins, max. 12 V DC / 24 V AC / 0,5 A, 150 mOhm
D Video OUT VGA O Serial Interface COM 3 - COM 6
Mini-D-SUB, 15 pole, VGA, 1024 x 768 (only configuration, no video) Weidmüller, 20 pins, RS232
E Ethernet Interface 1 P Contact IN global (1-6)
RJ45, 10/100/1000 Mbps 7 pins on Weidmüller, 18 pins, only for switch / push button (dry contact)
F Ethernet Interface 2 Q Audio IN (1-8)
RJ45, 10/100/1000 Mbps D-SUB, 15 pole, 1 kOhm, 2.828 Vpp (for D-SUB/Cinch adapter cable)
G USB Interface R Audio IN (9-16)
2x USB 2.0, type A D-SUB, 15 pole 1 kOhm, 2.828 Vpp (for D-SUB/Cinch adapter cable)
H AUX / Line IN S Serial Interface COM 1
3.5 mm phone jack, 16 kOhm, 2.828 Vpp (for intercom) Weidmüller, 2 pins, RS485 (only for Dallmeier PTZ Dome cameras)
I Audio OUT
3.5 mm phone jack, 1 kOhm, 2.828 Vpp
J Microphone IN
3.5 mm phone jack, red, 4.3 kOhm, 2.828 Vpp (for intercom)
K Serial Interface COM 2
D-SUB, 9 pins, RS232
C D E
G H I J L M N P O Q R S F
K
Serial Interface COM 2 (K)
6
1
5
4
3
2
9
8
7
Pin Assignment
1 DCD (Data Carrier Detect)
2 RxD (Receive Data)
3 TxD (Transmit Data)
Pin Assignment
4 DTR (Data Terminal Ready)
5 GND
6 DSR (Data Set Ready)
Pin Assignment
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 RI (Ring Indicator)
Assignment of the Sockets
A B