dallmeier Panomera W Series, Пусконаладка

Страница: 58 / 68

58
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
Establishing the Connection (Panomera® WebConfig)
The factory default IP address of the
Panomera® master module (overview module) is:
192.168.2.31
You can change the IP address, subnet mask and gateway addressing of
the device using the Dallmeier software PService3.
➡ Ensure that your PC/web browser can establish a connection to your
Panomera® multifocal sensor system via the Ethernet (if necessary, con-
tact your network administrator for more information and assistance).
➡ Start the web browser.
➡ Enter the IP address of your Panomera® multifocal sensor system
(master module) into the address bar of the web browser.
➡ Confirm the input.
The connection to the Panomera® master module is then established.
After the successful connection to the Panomera® master module and
before the very first login, a system security dialog for the first-time access
is displayed.
The language of the graphical user interface (GUI) can be switched in
the top-left corner of the screen without the need to login.