dallmeier MDF5450HD-DN, Руководство по вводу в эксплуатацию

Страница: 13 / 56

Rev. 1.0.0 | © 2019 Dallmeier | www.dallmeier.com 13
Commissioning MDF5450HD-DN
Operation
➡ Observe the following notes for operating the device:
• If the device or the cables connected to the device are located near sources with strong radiation (e.g. radio transmitters, magnetic fields), the video
image may be distorted.
• The device is equipped with Automatic Gain Control (AGC). In low-light conditions the image may be altered (e.g. noise). This is not a malfunction.
• The video image quality depends on the lighting conditions and the used monitor.
• The accuracy of the Automatic White Balance (AWB) algorithm depends on the used lighting.
Mixed light (consisting of artificial light and daylight) may cause color distortions (inaccurate color reproduction).
• Poor lighting can lead to an incorrect white balance.
Approvals/Certifications
The following approvals/certifications were valid for the device at the time of this document’s compilation:
• CE, FCC, RCM, UL, DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.